ADEMCO VISTA-120 Guia de Configuração descarregar pdf (Página 20)

Vista 120 Training Guide

VISTA 120 PROGRAMMING FORM

Some fields are programmed for each partition (shown as shaded fields). See the PARTITION-SPECIFIC section for programming these

fields. Standard default (*97) values are shown in brackets [ ], otherwise default = 0.

*24 IGNORE EXPANSION [0]

ZONE TAMPER 1=Ignore; 0=Enable tamper for RF and RPMs.

*25 BURG.TRIGGER FOR [1]

RESPONSE TYPE 8 1=enable; 0=disable

*26 INTELLIGENT TEST REPORTING [0] 1=yes, (no report sent if any other report was recently sent); 0=no.

*27 TEST REPORT INTERVAL | | [024]

001-999; 000=no report; Enter interval in hours.

*28 POWER UP IN PREVIOUS STATE [1] 1=yes; 0=no

*29 QUICK ARM Partition-Specific

*30 MULTIFREQUENCY OR [0] ( 1 = Recommended )

PULSE DIAL 1=Multifrequency (DTMF); 0=Pulse Dial

*31 PABX ACCESS CODE | | | |

Enter 00-09; B-F (11-15)

*32 PRIMARY SUBS. ACCT # Partit ion-Specific

*33 PRIMARY PHONE NUMBER

Enter 0-9 for each digit. Enter #11 for *, #12 for #, #13 for 2 second pause

*34 SECONDARY PHONE NUMBER

Enter 0-9 for each digit. Enter #11 for *, #12 for #, #13 for 2 second pause

*35 DOWNLOAD PHONE No.

Enter 0-9 for each digit. Enter #11 for *, #12 for #, #13 for 2 second pause

Enter 00-09; A-F (10-15) [15 15 15 15 15 15 15 15]

*37 DOWNLOAD COMMAND ENABLES 0 [1]

Dialler System Restrict Remote Remote Remote Upload Download

Shutdwn Shutdwn Access Bypass Disarm Arm Prog Prog

See field 1*53 for Callback disable option; 1=enable; 0=disable

† Restrict Download Access When Armed: Can only arm unarmed partitions,

upload the programme/ event log, command relays, and request status

*38 PREVENT ZONE XXX BYPASS Partition-Specific

*39 ENABLE OPEN/CLOSE REPORT Partition-Specific

FOR INSTALLER CODE

*40 OPEN/CLOSE REPORT

[0]

FOR KEYSWITCH 1=enable; 0=disable

*41 NORMALLY CLOSED or EOLR

[1]

(Zones 2-8) 1=N.C. loops; 0=EOLR supervision

*42 SUPPRESS FIRE ALARM RELAY 1= suppress fire alarm relay on 4204/Powerline Carrier Device relays

0= 4204/Powerline Carrier Device fire alarm relay activates on fire alarms

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 52 53

Sem comentários

ADEMCO VISTA-120 Guia de Configuração Página 20