ADEMCO Vista-128FB Guia de Configuração

K5894V5 6/04 Rev A AAAAAAAADDDDDDDDEEEEEEEEMMMMMMMMCCCCCCCCOOOOOOOO VVVVVVVVIIIIIIIISSSSSSSSTTTTTTTTAAAAAAAA SSSSSSSSEEEEEEEER

VISTA-128BP/VISTA-250BP Installation and Setup Guide 1-2 Features Hardwire and Optional Expansion Zones • Provides 9 hardwire zones. • Supports up t

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-2 Num. Window M T W T F S S H Desired Specifier Time 1 2 3…20

Section 6 – Scheduling Options 6-9 3. Enter the desired activation time (when the action is to take place). Select from: Activation Time Des

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-10 01 ACTION ? none 00 Enter the action code for this timed-event number

Section 6 – Scheduling Options 6-11 Bypass 65=Access Point Group Lock 66=Access Point Group Exit 77=Access Point Group Enable 78=Access Point Group Di

Section 6 – Scheduling Options 6-1 Limitation of Access Schedules Limitation of Access is a means by which a user’s access code is limited to working

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-14 Enter 0 at the “Quit ?” prompt to return to the main menu choices and continue programming.

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-14 Tue DISARM WIND. 00:00AM 00:00AM Repeat the procedure described above for all days of the

Section 6 – Scheduling Options 6-15 06 DAYS? MTWTFSS HIT 0-7 x x To select the days to be activated, enter 1-7 (Monday = 1). An “x” appe

7-1 SECTION 7 Downloading Primer (Remote Downloading is not a UL Listed feature) ••••••••••••••••••••••••••••••••••••••••••••••••• General Informati

Section 1 - General Description 1-3 • Can be armed in one of three STAY modes or Instant modes, automatically bypassing specific burglary zones regar

VISTA-128BP/VISTA-250BP Installation and Setup Guide 7-2 The installer can mount the control, attach a keypad and phone line, and continue to wire the

Section 7 – Downloading 7-3 Getting On-Line with a Control Panel At the protected premises, the control panel must be connected to the existing telep

VISTA-128BP/VISTA-250BP Installation and Setup Guide 7-16 To download a control without programming any information, perform the following steps: Step

VISTA-128BP/VISTA-250BP Installation and Setup Guide 7-2 Connector J8 on the main PC board (see the Summary of Connections diagram on the inside back

8-1 SECTION 8 Setting the Real-Time Clock ••••••••••••••••••••••••••••••••••••••••••••••••• General Information This system provides a real-time clo

VISTA-128BP/VISTA-250BP Installation and Setup Guide 8-2 Press [✳] to exit the real-time clock edit mode.

8-3

9-1 SECTION 9 User Access Codes ••••••••••••••••••••••••••••••••••••••••••••••••• General Information The VISTA-128BP allows a total of 150 security

VISTA-128BP/VISTA-250BP Installation and Setup Guide 1-4 Downloading • Supports upload and download capability. • Can perform unattended downloading

VISTA-128BP/VISTA-250BP Installation and Setup Guide 9-2 • Operator C (sometimes known as the Babysitter Code) cannot disarm the system unless the sy

VISTA-128BP/VISTA-250BP Installation and Setup Guide 9-2 In the above example, User 3 has MASTER authority in Partition 1 and OPERATOR B authority in

VISTA-128BP/VISTA-250BP Installation and Setup Guide 9-4 • Open/Close option for this user in the displayed partition (see Open/Close prompt above).

Section 9 - User Access Codes 9-5 A user code can be deleted only from the partition through which it was entered. If an attempt is made to delete f

10-1 SECTION 10 Testing the System ••••••••••••••••••••••••••••••••••••••••••••••••• Battery Test When AC power is present, the VISTA-128BP/VISTA-25

VISTA-128BP/VISTA-250BP Installation and Setup Guide 10-2 A display of “COMM. FAILURE” indicates a failure to communicate (no kissoff by the receiver

VISTA-128BP/VISTA-250BP Installation and Setup Guide 10-2 Go/No Go Test Mode. Trouble Conditions Check or Trouble Messages Display Description CHECK

VISTA-128BP/VISTA-250BP Installation and Setup Guide 10-4 Contacting Technical Support PLEASE, before you call Technical Support, be sure you: • READ

A-1 APPENDIX A Regulatory Agency Statements ••••••••••••••••••••••••••••••••••••••••••••••••• UL Installation Requirements The following requirement

2-1 SECTION 2 Partitioning and Panel Linking •••••••••••••••••••••••••••••••••••••••••••••••••• Theory of Partitioning This system provides the abil

VISTA-128BP/VISTA-250BP Installation and Setup Guide A-2 UL611/UL1610 Central Station Burglary Alarm Follow the instructions for UL609 Local installa

Appendix A – Regulatory Agency Statements A-3 FEDERAL COMMUNICATIONS COMMISSION (FCC) PART 15 STATEMENT NOTE: This equipment has been tested and found

VISTA-128BP/VISTA-250BP Installation and Setup Guide A-4 CANADIAN EMISSIONS STATEMENTS This Class B digital apparatus complies with Canadian ICES-003

B-1 APPENDIX B Summary of System Commands •••••••••••••••••••••••••••••••••••••••••••••••••• User Code Commands Add A User Code = User Code + 8 + Ne

VISTA-128BP/VISTA-250BP Installation and Setup Guide B-2 Scheduling Commands Installer-Programmed Schedule Events = Installer Code + [#] + 80 (Install

C-1 APPENDIX C Specifications •••••••••••••••••••••••••••••••••••••••••••••••••• VISTA-128BP/VISTA-250BP CONTROL Physical: Standard Cabinet (include

VISTA-128BP/VISTA-250BP Installation and Setup Guide C-2 YELLOW: Data from control panel BLACK: Ground and (-) connection from supplemental pow

D1APPENDIX D Contact ID and Pager Event Codes •••••••••••••••••••••••••••••••••••••••••••••••••• TABLE OF CONTACT ID EVENT CODES Code Definition 11

VISTA-128BP/VISTA-250BP Installation and Setup Guide D2DISRMD-EARLY Disarmed Early DISRMD-LATE Disarmed Late Alpha Event Description MISSED DISRM Mis

Id1Index •••••••••••••••••••••••••••••••••••••••••••••••••• #93 Menu Mode Programming ... 4-2 #93 Menu Mode Programmi

VISTA-128BP/VISTA-250BP Installation and Setup Guide 2-2 1*18 Affects Lobby (must be programmed by partition) Setting this field to 1 for a specific

C Cabinet Lock... 3-1 California State Fire Marshal (CSFM) ...A-2 Cal

VISTA-128BP/VISTA-250BP Installation and Setup Guide Index-D-2 Fire With Verification Type 16... 4-7 First Communicat

P PA400... 3-4 PABX Access Code...

VISTA-128BP/VISTA-250BP Installation and Setup Guide Index-D-4 Remote Keypad Sounder ... 3-20 REPORT CODE PROG...

VA8201... 3-23 View Capabilities ...

as the ambient temperature of the protected area approaches the temperature range of 90° to 105°F (32° to 40°C), the detection performance can decre

VISTA-128BP/VISTA-250BP Installation and Setup Guide Index-D-2 This warranty replaces any previous warranties and is the only warranty made by Seller

ÊK5894V5%Š K5894V5 6/04 Rev A

Section 3 - Installing the Control 2-3 affect and arm the lobby if the users of that partition are expected to be the last to leave the building. How

VISTA-128BP/VISTA-250BP Installation and Setup Guide 2-4 Press [✴] + [0] or [✴] + [9] to return to the master partition. Otherwise, if no keys are pre

VISTA-128BP/VISTA-250BP Installation and Setup Guide 2-4 Single-Partition Single-Panel Mode To access the Single-Partition, Single Panel mode, perfor

VISTA-128BP/VISTA-250BP Installation and Setup Guide 2-6 1. The user cannot execute another panel linking mode. To execute another panel linking mode

Section 3 - Installing the Control 2-7 7 Bypass B

.

3-1 SECTION 3 Installing the Control ••••••••••••••••••••••••••••••••••••••••••••••••• This section describes the procedures for mounting and wiring

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-2 • Fasten the cabinet door to the cabinet backbox using the 18 one-inch-long Phillips-head sc

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-4 Figure 3-3: Mounting the PC Board Installing the Keypads • Up to 31 addressable keypads (a

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-4 Addressing the Keypads The keypads will not operate until they are physically addressed and

Section 3 - Installing the Control 3-5 UL This control complies with National Fire Protection Association (NFPA) requirements for temporal pulse sound

Section 3 - Installing the Control 3-5 Using a Siren Driver To install a siren driver, perform the following steps: Step Action 1 Mount the siren dri

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-6 The maximum zone resistance is 100 ohms for zones 1 and 8, and 300 ohms for all other zones

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-8 2k EOLRZONE 1SMOKE(+)(-)2-WIRE SMOKEDETECTOR 1011(+)(-) Figure 3-10: 2-Wire Smoke Detector

iii Table of Contents •••••••••••••••••••••••••••••••••••••••••••••••••• List of Figures...

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-2 The 333PRM reverses polarity to smoke detectors with Integral Temp-3 Sounders. Typically,

Section 3 - Installing the Control 3-9 -+-+-+EOL POWERSUPERVISIONRELAY MODULEA77-761B4-WIRE SMOKEDETECTORS 2000OHMEOLRTO FIRE ZONETERMINALSHEATDETECT

Section 3 - Installing the Control 3-11 21 and 22). See Figure 3-13. 3 Connect the EOL resistor at the last detector in the loop across the zone’s t

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-12 4208U Universal 8-Zone Expander 4939SN-BR 4939SN-GY Serial Number Surface-Mount Reed Contac

Section 3 - Installing the Control 3-13 To install polling loop devices, perform the following steps: Step Action 1 Select devices from the list of c

Section 3 - Installing the Control 3-13 CONTROL PANELRPMINPUT POLLING LOOPEXTENSION POLLING LOOP RPM4297RPMRPMTOOTHERRPMSINPUT LOOP LIMITS: EXTENSION

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-14 • Zones 988 and 990 are used to supervise the RF reception of receivers 2 and 1, respective

Section 3 - Installing the Control 3-15 TO CONTROL'S REMOTE KEYPADCONNECTION POINTS. USE MAX. of 220 ft. [67m of #22 (0.64mm)WIRE or 550 ft. (16

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-16 • For button-type transmitters (wireless keys), such as the 5804 and 5804BD, you must assig

Section 3 - Installing the Control 3-17 Installing Output Devices The VISTA-128BP/VISTA-250BP support up to 96 outputs. Each device must be programme

Table of Contents iv Programming for Access Control...

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-18 3 Connect the module to the control’s keypad terminals (6, 7, 8, and 9). 00000ECP BusD

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-16 3 Program field 1✳46 Auxiliary Output Enable with a [0]. 1234567894142TRCABLEGRAY (GROUND)Y

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-20 2K ELOR2K ELORTAMPER SWITCH(CONTACTS CLOSE WHENSWITCH DEPRESSED).LOCK SWITCH(NORMALLY OPEN)+

Section 3 - Installing the Control 3-20 Installing the VA8200 Panel Link Module The VA8200 Panel Link Module (PLM) connects to the keypad (ECP) termi

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-22 Long Range Radio Connected to the J7 Triggers These triggers may be used to trip auxiliary

Section 3 - Installing the Control 3-23 2 Connect the data in/out terminals and voltage input terminals of the radio to the control’s keypad connecti

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-24 Paging Service Advisory If you are setting up the software for the first time, contact your

Section 3 - Installing the Control 3-25 VA8201 ALPHA PAGER MODULEAUXPWR.PARALLELPRINTERPARALLELOUTPUTSERIALOUTPUTDATA/POWERTO PHONETO LINEEARTH GROUND

Table of Contents v ADEMCO LIMITED WARRANTY

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-26 Step Action 4 Connect the leads to TB1 in the following order: a. All ground leads to term

Section 3 - Installing the Control 3-27 The VGM then reformats and retransmits this information to the Main Logic Board, (MLB) on the PassPoint ACS ne

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-28 serial port to the 4100SM Interface Module. 123456789NUJ8 CONNECTORVIOLETGREYYELLOWREDGREENB

Section 3 - Installing the Control 3-29 control cabinet’s door. 3 Make 12V (+) and (–) and data-in and data-out connections from the VIP Module to th

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-30 Installing the Audio Alarm Verification Module UL Audio Alarm Verification (AAV) is not

Section 3 - Installing the Control 3-31 REDGREENRINGTIPNOT USEDEARTH GNDGNDAUXILIARY AUD ENABLEAUXILIARY AUD INSPKR 7SPKR 6SPKR 5SPKR 4SPKR 3SPKR 2SPK

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-32 NOTE: The keypad connected to the TeleSmart module must be the 6139T. UL TeleSmart is not p

Section 3 - Installing the Control 3-33 TYPICALCONTROL’SPHONE TERMINALSLOCAL INCOMINGRINGTIPRINGTIPREDGREENBROWNGREYDIRECT CONNECTCORD12345678

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-34 INOUTGRN (DATA IN)RED (+12VDC)BLACK (–)YEL (DATA OUT)USE OUTERWIRES OFAUDIO CABLEAUDIO IN123

Section 3 - Installing the Control 3-35 Connecting the Transformer This product uses the 1361 transformer (1361CN in Canada). If you are using X-10 d

vi List of Figures •••••••••••••••••••••••••••••••••••••••••••••••••• Figure 3-1: Installing the Lock...

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-36 Panel Earth Ground Connections In order for the lightning transient protective devices in t

Section 3 - Installing the Control 3-37 3. In Table 3, enter devices connected to the Alarm Output. Calculate alarm currents, then add to get the Al

VISTA-128BP/VISTA-250BP Installation and Setup Guide 3-38 Total Capacity Add standby and alarm capacities 6. Use the Battery Selection Table to sel

4-1 SECTION 4 Programming ••••••••••••••••••••••••••••••••••••••••••••••••• NOTE: All references in this manual for number of zones, number of user

VISTA-128BP/VISTA-250BP Installation and Setup Guide 4-2 Press ✳94 to move to 3rd page (fields 2✳00 - 2✳88); press ✳99 to move back to 2nd page Entry

VISTA-128BP/VISTA-250BP Installation and Setup Guide 4-2 programming mode to display the first choice of the menu-driven programming functions. Press

VISTA-128BP/VISTA-250BP Installation and Setup Guide 4-4 1 = YES 0 = NO 0 Following is a list of commands used while in the Menu Mode: #93 Menu Mod

Section 4 – Programming 4-5 Alarm Rstr Bypass Trbl Opn/Cls Low Bat Communication Defaults for Zones ZONE # 1st 2nd ZONE # 1st 2nd ZON

VISTA-128BP/VISTA-250BP Installation and Setup Guide 4-6 ZONE # 1st 2nd ZONE # 1st 2nd ZONE # 1st 2nd ZONE # 1st 2nd 209 14 00 227 02 00

Section 4 – Programming 4-7 Provides a fire alarm on a short circuit and a trouble condition on open circuit. A fire alarm produces a pulsing of the b

vii Conventions Used in This Manual •••••••••••••••••••••••••••••••••••••••••••••••••• Before you begin using this manual, it is important that you

VISTA-128BP/VISTA-250BP Installation and Setup Guide 4-8 Type 05 Unsupervised Button RF (BR) Select for 5800 Series RF transmitters specifically desig

Section 4 – Programming 4-9 • 2✳30 Enter 1 to enable the Alpha Pager Module. • 2✳31 - 2✳88 Paging service parameters. The events (e.g., field 2*39)

VISTA-128BP/VISTA-250BP Installation and Setup Guide 4-10 function the same as alpha keypads, except when the code + # 73 is entered. This entry will

Section 4 – Programming 4-11 This must be done so that TeleSmart can be accessed remotely (off premises). Refer to Device Programming in the #93 Menu

5-1 SECTION 5 Data Field Descriptions ••••••••••••••••••••••••••••••••••••••••••••••••• About Data Field Programming The following pages list this c

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-2 FIELD TITLE and DATA ENTRIES EXPLANATION *09 Entry Delay #1 (partition-specific)Enter 02-1

Section 5 – Data Field Descriptions 5-3 *20 VIP Module Phone Code 1-9 = first digit of access code ∗∗∗∗ or # = second digit of access code (enter #

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-4 TouchTone or Rotary Dial 0 = disable 1 = enable Select the dialing method for the system If

Section 5 – Data Field Descriptions 5-5 *40 Enable Open/Close report for Keyswitch 0 = disable 1 = enable If enabled, whenever the keyswitch is used t

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-6 *51 Dual Reporting 0 = disable 1 = enable If enabled, all reports are to be sent to both prim

Section 5 – Data Field Descriptions 5-7 *84 Swinger Suppression (partition-specific) Enter 01-15. Enter 00 for unlimited reports This option limits t

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-8 1*19 Arms Lobby (partition-specific) 0 = disable 1 = enable If enabled, arming this partition

Section 5 – Data Field Descriptions 5-9 Conditions That Affect Cross-Zone Operation • If one of the zones in a pair is bypassed or has a zone respons

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-10 1*29 RF Transmitter Low Battery Reporting 0 = disable 1 = enable If enabled, the system send

Section 5 – Data Field Descriptions 5-11 1*45 Exit Delay Sounding (partition-specific) 0 = disable 1 = enable If enabled, the system produces slow bee

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-12 1*60 Zone 5 Audio Alarm Verification 0 = disable 1 = enable If enabled, zone 5 is used for 2

Section 5 – Data Field Descriptions 5-13 2*05 Auto-Arm Delay (partition-specific) 00 = no delay. 01-14 times 4 minutes (04-56) delay. 15 = no auto ar

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-14 2*21 Supervision Pulses for LRR 0 = disable 1 = enable There are three entries in this field

Section 5 – Data Field Descriptions 5-15 2*38 Pager 1 Partition Enable 0 = disable 1 = enable This field has eight entries, one for each partition. If

1-1 SECTION 1 General Description •••••••••••••••••••••••••••••••••••••••••••••••••• About the VISTA-128BP/VISTA-250BP All references to the VISTA

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-16 2*52 Pager 3 Partition Enable 0 = disable 1 = enable This field has eight entries, one for e

Section 5 – Data Field Descriptions 5-17 2*66 Pager 5 Partition Enable 0 = disable 1 = enable This field has eight entries, one for each partition. If

VISTA-128BP/VISTA-250BP Installation and Setup Guide 5-18 2*81 Pager 7 Trigger Event Enables 0 = disable 1 = enable This field has five entries as fol

6-1 SECTION 6 Scheduling Options ••••••••••••••••••••••••••••••••••••••••••••••••• UL • You must program Bypass and Auto-Arm Fail reports for UL i

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-2 Exception Reports This option allows the reporting of openings and closings to the central st

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-2 station (reporting by exception, field 2*09). The system can be programmed to automatically

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-4 Scheduling Menu Mode The #80 Scheduling Menu Mode is used to program most of the scheduling

Section 6 – Scheduling Options 6-5 Holidays ? 1 = YES 0 = NO 0 Enter 1 to program holiday schedules. Refer to Holiday Schedule Programming later

VISTA-128BP/VISTA-250BP Installation and Setup Guide 6-2 Because the time windows are shared among all partitions, it is important to make sure that

6-1 Holiday Schedules A holiday schedule overrides the regular daily open/close schedule on the programmed holidays throughout the year. The system p