ADEMCO 5130XM Manual de Instruções Página 6

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 30
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 5
I. GENERAL
INFORMATION
THE VISTA CONTROLS
The VISTA XM Controls are microprocessor based
programmable systems and feature EEROM memory
technology (power loss does not result in the loss
of information). The Controls support up to 9 wired
zones of protection, expandable to 64 zones (wired
and/or wireless) when connected to a P-wire
polling loop.
EASY PROGRAMMING
Programming can be performed at the office prior
to installation, or on the job site directly from the
keypad, or can be downloaded from a remote
location by using the Ademco 413OPC Downloading
Software.
For installer convenience, the Control is pre-
programmed with a set of standard values that is
designed to meet the needs of’ many installations.
These values, however, can be changed to suit the
needs of any particular installation. The Control
can also be pre-programmed by the installer with
one of four standard communication default
programming values, eliminating the need for
extensive programming time and effort
MEMORY-OF-ALARM
I
The VISTA Controls provide a memoryrof-alarm
I. ,,
.~
feature, which,
upon disarming the system,
automatically displays all zones that were in an
alarm condition while the system was armed. In
addition,
a 10 day alarm/trouble history is
maintained by the system, which helps the installer
or central station to identify problem sensors. To
activate this feature, enter the security code + the
I01 key.
BUILT-IN USER’S MANUAL and
DESCRIPTIOR REVIEW
For end-user convenience, the 5130XM and
4140XM (with 5137) conlain a built-in Users
Manual. By depressing and holding any of the
function keys on the console for 5 seconds, a brief
explanation of that particular function scrolls
across the alpha-numeric display.
In addition, all programmed zone descriptors can be
displayed (one at a time) by pressing and holding
the READY key for 5 seconds, then releasing the
key. This serves as a check for installers to be
sure all descriptors are entered properly.
mnr
41
or4192cP =
,-Es.
EXPANDER
Three technologies to suit every installation:
HARDWIRE, SUPERVISED WIRELESS, O-WIRE MULTIPLEX
-4-
WWW.DIYALARMFORUM.COM
Vista de página 5
1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Comentários a estes Manuais

Sem comentários