ADEMCO VISTA-50PEN Instruções de Operação descarregar pdf (Página 18)

– 18 –

Security Codes & Authority Levels (cont’d)

To Exit User Edit Mode

You can exit any of the user edit modes described on the following

pages at any time by doing the following:

1. Press either

✴

, or don't press any key for 10 seconds.

2. System returns to normal mode.

To Add a User

IMPORTANT:

Temporary users should not be shown how to use any

system function they do not need to know (e.g. bypassing protection

zones).

CODE

1. Enter Master or Manager code and press the 8 key.

2. Enter the new user's 3-digit User Number (002-150).

3. Enter 4-digit security code for that user. The following prompts will

appear.

ADD NEW USER?

0 = NO , 1 = YES

Enter 1 to add a new user code. Entering 0

will change the existing user's code to the code

entered in step 3. See Changing A User's Code

section.

USER NUMBER = 003

ENTER AUTH. LEVEL

Enter the authority level, 1-6, for this user

within this partition.

1=master 2=manager 3=operator A

4=operator B 5=operator C 6=duress code

ACCESS GROUP?

ENTER 0-8

If access schedules have been programmed,

this prompt appears. Enter the user's access

group number (1-8) if this user should have

limited access to the system. Enter 0 if no

access group should be assigned.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

Sem comentários

ADEMCO VISTA-50PEN Instruções de Operação Página 18