ADEMCO VISTA-50PEN Instruções de Operação descarregar pdf (Página 54)

– 54 –

Using #77 Instant Activation Mode

The #77 Instant Activation Mode is used to activate outputs, bypass

zones, etc. The actions that may be activated are relay commands,

arm/disarm commands, zone bypassing commands, and open/close

access conditions.

Relay Commands

Action Code

Action Specifier

01 Relay On Relay #

02 Relay Off Relay #

03 Relay Close for 2 seconds Relay #

04 Relay Close XX minutes

✳

Relay #

05 Relay Close YY seconds

✳

Relay #

06 Relay Group On Relay Group #

07 Relay Group Off Relay Group #

08 Relay Group Close for 2 seconds Relay Group #

09 Relay Group Close XX minutes

✳

Relay Group #

10 Relay Group Close YY seconds

✳

Relay Group #

✳

Check with your installer for the amount of time.

Arm/Disarm Commands

Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid

choices for automatic arming and disarming functions.

"During" can be used to arm or disarm the control for a specific time

only. For example, if "during" is selected with Arm-STAY, the system

will automatically Arm-STAY at the beginning of the window and

automatically disarm at the end of the window.

Action Code

Action Specifier

20 Arm-STAY Partition(s)

21 Arm AWAY Partition(s)

22 Disarm Partition(s)

23 Force Arm STAY (Auto-bypass faulted zns) Partition(s)

24 Force Arm AWAY (Auto-bypass faulted zns) Partition(s)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 83 84

Comentários a estes Manuais

Sem comentários

ADEMCO VISTA-50PEN Instruções de Operação Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADEMCO VISTA-50PEN