ADEMCO Vista-128B PLUS Guia de Configuração descarregar pdf (Página 12)

– 12 –

Partition-Specific Fields

(Duplicate this page for each partition in the installation.)

To program these fields,

1. Press *91 to select a partition.

2. Enter a partition-specific field number (ex. *09).

3. Make the required entry.

4. Repeat steps 1-3 for each partition in the system.

PARTITION #____ PROGRAM FIELDS

1st Page Fields

*06 QUICK EXIT [1]

1=enable; 0=disable

Must be 0 for UL installations.

*09 ENTRY DELAY #1 [02] |

00, 02-15 times 15 seconds.

Maximum 03 for UL Listed installations.

SIA Guidelines: The entry delay time and Burg Alarm Comm

Delay (field *88) combined cannot exceed 1 minute.

*10 EXIT DELAY #1 [04] |

00, 03-15 times 15 seconds.

Maximum 04 for UL Listed installations.

SIA Guidelines: Minimum 45 seconds “03”.

*11 ENTRY DELAY #2 [02] |

00, 02-15 times 15 seconds.

Maximum 03 for UL installations.

SIA Guidelines: The entry delay time and Burg Alarm Comm

Delay (field *88) combined cannot exceed 1 minute.

*12 EXIT DELAY #2 [08] |

00, 03-15 times 15 seconds.

Maximum 04 for UL installations.

SIA Guidelines: Minimum 45 seconds “03”.

*13 ALARM SOUNDER DURATION [04] |

01-15 times 2 minutes.

Must be minimum 16 minutes for UL installations.

SIA Guidelines: Must be minimum 6 minutes.

*16 CONFIRMATION OF ARMING DING [0]

1=enable; 0=disable.

Must be "1" for UL installations.

*22 KEYPAD PANIC ENABLES [001]

1=enable; 0=disable 995 996 999

*23 MULTIPLE ALARMS [1]

1=yes; 0=no.

Must be 1 for UL installations.

*29 QUICK ARM [1]

1=yes; 0=no

*32 PRIM. SUBS. ACCT # | | | |

Enter 00-09; B-F (11-15) [15 15 15 15]

*38 PREVENT ZONE XXX BYPASS [000] | |

001-250; 000 if all zones can be bypassed

*39

ENABLE OPEN/CLOSE REPORT [1]

FOR INSTALLER CODE

1=enable; 0=disable

*84 SWINGER SUPPRESSION [01] |

01-15 alarms;

Must be "00" (disabled) for UL installations..

*85 ENABLE DIALER REPORTS FOR PANICS & DURESS

1=enable; [0=disable]

995

996

999

Duress

*87 ENTRY WARNING [1]

1=continuous; 0=3 beeps

*88 BURG. ALARM COMM. DELAY [1]

1=30 seconds; 0=no delay.

Must be "0" for UL installations. SIA Guidelines: Must be “1”.

*90 SEC. SUBS. ACCT # | | | |

Enter 00-09; B-F (11-15) [15 15 15 15]

2nd Page Fields

1*18 AFFECTS LOBBY [0]

Enter 1 if this partition affects the common lobby; enter 0 if it

does not.

1*19

ARMS LOBBY [0]

Enter 1 if arming this partition attempts to arm lobby; enter 0

if it does not

1*26

PANIC BUTTON OR SPEEDKEY

[00, 00, 00, 00]

Enter speedkey macro # (01-35) to use keys A-C for macro.

Otherwise enter 00 to use as panic. For D key, enter macro

# or 00 to select macro when key is pressed.

1*43 PERM. KEYPAD BACKLIGHT [0]

1=enable; 0=disable When disabled, display lights when

any key is pressed, and turns off after period of keypad

inactivity.

1*45 EXIT DELAY SOUNDING [1]

1=enable; 0=disable. Produces quick beeping during exit

delay if enabled. NOTE: See page 32, “SOUND OPTION”,

prompt for disabling the entry/exit beeps on individual

keypads.

1*47 CHIME ON BELL 1 [0]

1=enable; 0=disable

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comentários a estes Manuais

Sem comentários

ADEMCO Vista-128B PLUS Guia de Configuração Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADEMCO Vista-128B PLUS