Burglary Siren Outpul #t , Confirmation of Arming “‘Ding”:
mm
Burglary Siren Output #2. Confirmation of Am\ing “Ding”:
mm0
11. Not Used
12. WasWr Security Code Dominance gekctlon:
Select 1 if Secondary Security Codes are to be usable at any time
or 0 if arming with the Master Code is to inhibit disarming by the
secondary codes.
cl
Control PROM Date Group 2
To program, set Phone No. Selector Switch to “Primary” and Rotary
Switch lo Position 2 (Main Phone No.) on No. 690 PROM Programmer.
‘NO= Select l-6 for communicator reports; duplicate assignments
allowed.
Select 0 if communicator report not desired for a zone.
1. Communlutor Alarm Co&/Channel’
Aulgned to Zone 1:
q
2. Communicator Alarm CoddChurml’
Aulgned to zone 2
cl
3. Communlutor Alarm Code/Channel’
Auigned b Zone 3:
cl
4. Communicator Alarm Code/Channel’
Aselgned to Zone 4:
cl
5. Communlwtor Alarm Code/Channel’
Aulgnad to Zone 5:
cl
6. Communicator Alarm Code/Channel’
Aulgned to Zone 8:
cl
7. Communicator Alarm Code/Chennef*
Aulgned to Duress
Alan:
g-12 Not Used.
Conlrol PROM Data Group 3
To program. set Phone No. Selector Switch to “Primary” and Rotary
Stitch to Position 3 (Subs ID U) on No. 690 PROM Programmer.
Master Secuflty Code (Select from O-9 digit set, repeating digits
permitted):
Ii cl cl cl
Conbd FROM Data Group4
To program. set Rotary Switch to Position 6 (‘Inverted”) on No. 690
PROM Programmer and raise switches for checked boxes.
Communlwtor Reporl Wecllon:
(check as many as desired)
SWITCHES
1
2
3 4
OPEN
SHUNTED
ZONE 4
AC FAIL
-.--
e-w-
CLOSE
ZONES
TROUBLE
LO BATT
5
6
7
6
CANCEL NOT
NOT
NOT
CODE
USED
USED
USED
NOTES:
1. Shunted Burglary Zone Reporl is transmitted at Armed
AWAY time. Shunted 24 Hour Zone Report is transmitted
immediately.
2. Cancel Code is transmitted if a burglary atarm is tumed ofl while Vte
alarm sounder is sounding (not applicable lo fire and panic alarms).
When a Cancel Code is enabled in this Control PROM, Open/Close
reporting must not be selected in this group and an Opening Code
must be enabled in PROM Data Group 6 of the CommunluUon
PROM (if any format other than Ademco’s high speed format is used).
3. AC Fail/Low Battery Reporting should be selected if Radionics
“BFSK’ reporting is used.
ConImd PROM Data Group 5
To program, set Rotary Switch to Position 7 (“16 Set Delay”) and raise
switches for checked boxes.
!&conday 16 second Communicator Reporl Delay: (check.rewrts
for which desired)
SWITCHES
1 2
3 4
ZONE
ZONE
ZONE ZONE
1 2 3
4
5 6
7 8
I
ZONE
I
ZONE
5 6
I
ZONE 4
TROUBLE
I
CLOSING
REPORT
I
Control PROM Data Group 6
To program, set Rotary Switch lo Position 6 (“Secondary # Only”) and
raise switches tar checked boxes.
Communlutor Reporl to Woond Telephone Number ONLY: (Check
reports for which desired)
SWITCHES
1
2
3
4
ZONE ZONE
ZONE
ZONE
1 2
3 4
5- 6
ZONE
ZONE
5 6
A
7 6
ZONE 4
OPEN/CLOSE
TROUBLE
AND SHUNTS
L.
Control PROM Data Group 7
To program. set Rotary Switch to Position 9 (“Open/Close”) and raise
switches for checked boxes.
Wbcellaneous Communicator Reporting Selactlonz (Check as many as
desired)
SWITCHES
1 2
3 4
ALL REPORTS
ON ONE
CALL
DURESS
ALARM TO
2ND
TELCO
NO. ONLY
AC FAIL.
LOW BATT
LOW
REPORT
BATTERY.
IN NEW
TEST REPORT
ADEMCO
TO 2ND TELCO
HI SPEED
NO. ONLY
FORMAT
L
I
I
I
5
6
7
6
I
NOT
I
NOT
USED
USED
I
DUAL
REPORT
I
ALTERNATE
BY PAIRS
I
DIALING
(16 páginas)
(64 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais