ADEMCO 4160-12 C-COM Manual do Utilizador descarregar pdf (Página 6)

*Should be enabled on all telco networks which have called party disconnect

(hanging up the phone for a period of time will cause disconnect of an

incoming call)

Communication PROM Data Group 13

The extended delay should only ba used when orbiting satellites are

used to relay telco transmissions and an AdemCO 685 Receiver, Soft-

ware Revision 3.7 or higher is used. When other receivers are used, con-

sult with the manutacturer.

To program. set Rotary Switch to Position 10 (“Restore”) and set switches Dhllng and Roportlng Chwaclwistla Sektlon

(Check as desired):

for checked boxes as indicated.

SWITCHES

2 3

6 7 8

*Only effective il Switch 7 in PROM Oata Group 12 was down when that

Oata Group was programmed.

Communimtlon PROM Data Group 14

’

To program, set Rotary Switch to Position 11 (“Not Used”) and raise

switches for checked boxes representing bits set within the hexadecimal

Code.

Ada00 Low SpeWSESCOMRadionIu Repwthg Code for Lou of

A.C. and Alma Restore (S&cl from O-9, B-F)

Loss of AC.

Alarm Restore

SWITCHES

5 6

Bit Weights 1

‘NOTtB An entry is mandatory for these codes (e.g. 9) in the indicated

formats, even though there is no interest in receiving these

reports.

Communlutlon PROM Data Group 15

2 4

To program. set Rotary switch to Position 12 (“Not Used”) and raise switch

4 if box is checked.

Fin Zone Ddg~lk~ tar ‘BFSK” alarm fopoWnS (check ii zone four is

selected as a fire zone)

SWITCHES

6 7

CommunluUon PROM Data Group 16

To program, set Rotary Switch to Position 13 (“Not Used”) and raise

Mmnco Low SpwdBESCOM?mSonlca Roporthg Codn tar &n.

switches for checked boxes representing biis set within the hexadecimal

Brpar and Bypass Rostom (Select from O-9. B-F)

code.

zone Bypass

Bypass Restore

SWITCHES

5 6

Bit Weights 1

2 4

‘See note below next group.

1 2 3 4 5 6 7

(e.g.. 9) 3
Group 5 4

Comentários a estes Manuais

Sem comentários

ADEMCO 4160-12 C-COM Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADEMCO 4160-12 C-COM