ADEMCO VISTA-100 Manual do Utilizador descarregar pdf (Página 14)

– 14 –

2*20 ENABLE J7 TRIGGERS by PARTITION [1]

0=disable for displayed partition; 1=enable for displayed

partition

2*22 DISPLAY FIRE ALARMS OF [0]

OTHER PARTITIONS

0=No; 1=Yes

2*23 DISPLAY BURG/PANIC ALARMS OF OTHER [0]

PARTITIONS

10=No; 1=Yes

2*24 DISPLAY TROUBLES OF OTHER [0]

PARTITIONS

0=No; 1=Yes

4th Page Fields

3*57 BELL 2 & AUX. RELAY CONFIRM

ARM. DING 1=enable; [0=disable] Bell 2 Relay

Must be "1" for UL.

3*59 ENABLE BELL 2 & AUX. RELAY

CHIME ANNUNCIATION Bell 2 Relay

1=enable; [0=disable]

3*60 BELL 2 & AUX. RELAY TIMEOUT | |

00-15 times 2 minutes; 00=no timeout [00,00] Bell 2 Relay

Minimum 16 min. for UL Burglary installations.

SUMMARY OF PROGRAMMING COMMANDS

• To enter program mode, enter installer code +

[8] + [0] + [0]

• To set standard defaults, press *97

• To set communication defaults, press *94 +

one of the following: *80=low speed; *81=Ademco

Express; *82=Ademco High Speed; *83=Ademco's

Contact ID

• To change to next page of program fields,

press *94

• To return to previous set of fields, press *99

• To erase account & phone number field

entries, press [*] + field number + [*]

• To assign zone descriptors, press #93 +

follow menu prompts

• To add custom words, press #93 + follow menu

prompts

• To enter Installer's Message, press #93 +

follow menu prompts

• To exit program mode, press *99 OR *98: *99

allows re-access to programming mode by installer

code. *98 prevents re-access to programming

mode by installer code.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentários a estes Manuais

Sem comentários

ADEMCO VISTA-100 Manual do Utilizador Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADEMCO VISTA-100