ADEMCO VISTA-100 Manual do Utilizador descarregar pdf (Página 6)

– 6 –

VISTA 100 SINGLE PARTITION PROGRAMMING FORM

*00 INSTALLER CODE | | |

Enter 4 digits, 0-9 [5140]

*08 TEMPORAL SIREN PULSE [0]

1 = Yes; 0 = No

*09 ENTRY DELAY #1 [02] |

00-15 times 15 seconds

Maximum "03" for UL Commercial Burglary installations.

*10 EXIT DELAY #1 [03] |

00-15 times 15 seconds

Maximum "04" for UL Listed installations.

*11 ENTRY DELAY #2 [06] |

00-15 times 15 seconds (must be longer than Entry Delay #1)

Maximum "03" for UL Commercial Burglary installations.

*12 EXIT DELAY #2 [08] |

00-15 times 15 seconds (must be longer than Exit Delay #1)

Maximum "04" for UL Commercial Burglary installations.

*13 BELL 1 TIMEOUT [04] |

01-15 times 2 minutes. Minimum 16 min. for UL Commercial

Burglary and 6 min. for Commercial Fire.

*15 KEYSWITCH ASSIGNMENT [0]

Enter partition in which keyswitch used,

1-8; 9=Silences bells if fire alarm

present; 0=disable

*16 BELL 1 CONFIRMATION OF ARMING DING [0]

1=enable; 0=disable. Must be "1" for UL Burglary Installations.

*17 AC LOSS KEYPAD SOUNDING [0]

1=yes; 0=no

*18 BELL 1 AC POWER LOSS ALARM [0]

1=yes; 0=no. Must be "1" for UL Commercial Burglary.

*19 RANDOMIZE AC LOSS REPORT [0]

1=10-40 min; 2=6-12 hrs; 0=normal report (about 2 min.

after AC loss). Must be "2" for Central and Remote

Station Fire alarm systems.

*20 VIP MODULE PHONE CODE | |

Enter 01 - 09 for the first digit; enter [00] , [00]

11 for "

" or 12 for "#" for the second digit. This field

Must be set to "0" for Commercial Fire & UL

Commercial Burglary installations.

*22 KEYPAD PANIC ENABLE [001]

1=enable; 0=disable 995 996 999

*23 MULTIPLE ALARMS [1]

1=yes; 0=no

*24 IGNORE EXPANSION ZONE TAMPER [0]

1=Ignore; 0=Enable tamper for RF and RPMs. Must be

"0" for UL installations if using these devices.

*25 BURG.TRIGGER FOR RESPONSE TYPE 8 [1]

1=enable; 0=disable

*26 INTELLIGENT TEST REPORTING [0]

1=yes, (no report sent if any other report was recently

sent); 0=no.. Must be 0 for Commercial Fire & UL

Commercial Burglary.

*27 TEST REPORT INTERVAL [024] | |

Enter interval in hours, 001-999; 000=no report ; Max.

024 for Commercial Fire & UL.

*28 POWER UP IN PREVIOUS STATE [1]

1=yes; 0=no; "1" for UL.

*29 QUICK ARM [1]

1=yes; 0=no

*30 MAIN DIALER (TOUCHTONE OR ROTARY) [0]

1=TouchTone; 0=rotary

*31 PABX ACCESS CODE | | | |

00-09; B-F (11-15)

*32 PRIM. SUBS. ACCT # | | | |

Enter 00-09; B-F (11-15) [15 15 15 15]

*33 PRIMARY PHONE NUMBER

Enter 0-9 for each digit. Enter #11 for *, #12 for #,

#13 for 2 second pause

*34 SECONDARY PHONE NUMBER

Enter 0-9 for each digit. Enter #11 for *, #12 for #,

#13 for 2 second pause

*35 DOWNLOAD PHONE No.

Enter 0-9 for each digit. Enter #11 for *, #12 for #,

#13 for 2 second pause

*36 DOWNLOAD ID No.

| | | | | | |

Enter 00-09; A-F (10-15) [15 15 15 15 15 15 15 15]

*37 DOWNLOAD COMMAND ENABLES

Dialer System Not Remote Remote Remote Upload Download

Shutdwn Shutdwn Used Bypass Disarm Arm Program Program

See field 1*53 for Callback disable option; [1=enable];

0=disable; For Commercial Fire & UL installations, all

entries must be "0."

*38 PREVENT ZONE XXX BYPASS [00] | |

001-087; 00 if all zones (except Fire zones) can be bypassed

*39 ENABLE OPEN/CLOSE REPORT FOR [0]

INSTALLER CODE 1=enable; 0=disable

*40 OPEN/CLOSE REPORT FOR KEYSWITCH [0]

1=enable; 0=disable

41 NORMALLY CLOSED or EOLR (Zones 3-8) [1]

1=N.C.loops; 0=EOLR supervision; Must be "0" for

Commercial Fire & UL.

*42 DIAL TONE PAUSE [0]

0=5 seconds; 1=11 seconds; 2=30 seconds; Must be

"0" Commercial Fire & UL.

*43 DIAL TONE DETECTION [1]

1=wait for true dial tone; 0=pause, then dial

*44 RING DETECTION COUNT [00]

01-14; 15=answering machine; 00=no detection.

Must be "00" for Commercial Fire & UL Burglary.

*45 PRIMARY FORMAT [0]

0=Low Speed; 1=Contact ID; 2=Ademco High Speed;

3=Ademco Express

*46 LOW SPEED FORMAT (Primary) [0]

0=Ademco Low Speed; 1=Sescoa/Radionics

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comentários a estes Manuais

Sem comentários

ADEMCO VISTA-100 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADEMCO VISTA-100