ADEMCO Accord Manual de Instalação descarregar pdf (Página 33)

• Alarm Condition.

• Panic Alarm.

• Fire Alarm.

This output may be used to trip a transistorized relay for control of auxiliary equip-

ment. The alarm trigger can also be inverted so that it is normally 0 V switching to 12

V, see Programming Group 5 Option 7 Trigger Output.

This option defaults to (3) Alarm.

Group 4 — Option 8 Easy Set

When enabled (1) this option allows users to (Full, Part or Night) set the system

without entering a user code.

When enabled users set the system by pressing the # key and : 1 (to Full Set), 2 (to

Part Set), or 3 (to Night Set). The same exit times as apply as with Full, Part and Night

Set. A valid user code is still required to unset the system.

This option defaults to 0 (disabled).

Group 4 — Option 9 Prevent Setting for Power Fails

This option determines which power fail conditions prevent setting of the system:

0. Mains fail.

1. Low battery.

2. Mains fail and low battery.

This option defaults to 0 (mains fail).

System Programming — Group 5 System Options

Group five programming is as follows:

1. The first digit entered is 5 for System Options.

2. The second digit is the required system option 1 — 9.

3. The third digit is the option value.

SNOITPOMETSYS

PUORGNOITPOTLUAFED

5.)seY=1,oN=0(ssoLCAfogninraWelbiduA=1)0(

5.)seY=1,oN=0(yrtnEyratnemelppuS=2)0(

.smralArofteseRreenignE=3

.)erotsinhceTroreenignE=3,erotsinhceT=2,reenignE=1,remotsuC=0(

)0(

5.)seY=1,oN=0(elbanEyektoH=4)0(

5.)seY=1,oN=0(dapyeKtimOotuA=5)0(

5.)devomeR.geN=1,deilppA.geN=0(tuptuOlleB=6)0(

5.)devomeR.geN=1,deilppA.geN=0(tuptuOreggirT=7)0(

.srepmaTyaDrofteseRreenignE=8

.)erotsinhceTroreenignE=3,erotsinhceT=2,reenignE=1,remotsuC=0(

)0(

5.).L.O.E=2,decnalaBelbuoD=1,pooLC/N=0(noitarugifnoCenoZ=9)0(

Table 3.11 Group 5 System Options

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 77 78

Sem comentários

ADEMCO Accord Manual de Instalação Página 33