ADEMCO 4140XMPT2 Manual do Utilizador descarregar pdf (Página 25)

– 25 –

VOLTAGE TRIGGERS (Connector J7)

(Ground Start Module, Keyswitch, Remote Console Sounder)

General Information Connector J7, located on the right hand side of the main PCB provides 4 trigger

outputs for operating the 675 Ground Start Module, the 4146 Keyswitch, a

remote console sounding piezo, and for triggering auxiliary alarm signaling

equipment. Note that these output triggers can be enabled by partition via

programming field 2*20.

The pin assignments of this connector are shown below. Use only the 4142TR

9-wire cable (available as an option) for making connections to this connector.

1 2 3 4 5 6 7 8 9

GRAY

YELLOW

WHITE

RED

GREEN

BROWN

BLUE

BLACK

GROUND

OUT 1

GROUND

OUT 2

GROUND

OUT 3

GROUND

OUT 4

J7 CONNECTOR

OUT 1: GROUND START OR OPEN/CLOSE

OUT 2: FIRE OR KEYSWITCH ARMED LED

OUT 3: BURGLARY/AUDIBLE PANIC/AUXILIARY

OUT 4: SILENT PANIC/DURESS OR KEYSWITCH READY LED

N/U

4142TR CABLE

Output 1 Operates, by default, as a trigger for the 675 ground start

module. This output may optionally be programmed to operate as

an open/close trigger or as a remote console sounder output.

Only one of these options may be used at any time.

Rating: When Activated: 10 - 13.8 VDC through 4K ohms (2.5mA

max)

When De-activated: 100 ohms to ground

Outputs 2 & 4 Operate, by default, as Fire and Silent Panic/Duress triggers

respectively. These triggers may optionally be programmed to act

as Arm and Ready status indicators when it is desired to use the

4146 keyswitch .

Output 2,3 &4 Rating: When Activated: 10 - 13.8 VDC through 5K ohms (2mA

max)

When De-activated: 1k ohms to ground

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 131 132

Comentários a estes Manuais

Sem comentários

ADEMCO 4140XMPT2 Manual do Utilizador Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADEMCO 4140XMPT2