ADEMCO 5130XM Manual de Instruções descarregar pdf (Página 67)

SYSTEM

CObfMVNXCATlONS

6 7

ADEMCO HIGH SPEED

REPORTING

ADEMCO’s

High Speed format transmits data in DTMF at a rate of 10

characters per second. The handshake frequency is 1400 Hz followed by

2300 Hz, and the kissoff frequency is 1400 Hz. The message wntains 13

digits

follows: A 4digit acwunt number + eight channels of zone

information (l-8 or duress plus 9-15) + one status channel, which identifies

the type of events being reported in the eight zone locations. A typical High

Speed report will be kissed off in under 5 sewnds.

Channels 1 through 8 mlght have one of the followlng condltlons:

l=NEWEVENT

2 = OPENING (Status Channel

Always = 2)

3 = RESTORE

4 = CLOSING (Status Channel Always = 4)

5 = NORMAL, NO EVENT TO REPORT

6 = PREVIOUSLY REPORTED, NOT YET RESTORED]

NOTE: Channel 1 will contain the user ID l-9, A-F if expanded OperrlClose

reporting is selected.

The status channel mlght have one of the followlng condltlons:

1 = DURESS (For Duress Plus Channels 9-15 Only)

2 = OPENING

3 - BYPASS (For Channels l-8 Only)

= CLOSING

5 = TROUBLE (For Channels l-8 Only)

6 = SYSTEM STATUS:

. AC LOSS in Channel 1

LOW BATTERY in Channel 2

. PROGRAM TAMPER in Channel 3

POWER ON RESET in Channel 4

7 = NORMAL AlARM STATUS (For Channels l-8 Only)

9 I TEST REPORT

A typical high speed report may look as follows:

1234 5115 5555 7 (Acct #1234 with alarms on channels 2

and 3)

To enable Ademw high speed reporting enter a 2 in field ‘46. To choose

which zones are to report, enter the channel you wish each zone to report on

(zone 1 = channel 01, etc.) in fields ‘81 - ‘64, 1’35-1’39. In fields ‘65 - ‘68.

enter

for desired reports (If 00 is entered, no report will be sent).

LIMITATIONS

When

using Ademco high speed, remember there are only 15 channels

available, plus a duress channel. If more than 15 zones are being used,

they will have to share channels.

2. With high speed reporting, channels 9-15 cannot report troubles or

bypasses. Use these channels for zones that will not have to repon these

conditions.

ADBMCO’s VISTA XM SERIES TECHNXCAL REFERENCE MANUAL

WWW.DIYALARMFORUM.COM

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 158 159

Comentários a estes Manuais

Sem comentários

ADEMCO 5130XM Manual de Instruções Página 67

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso ADEMCO 5130XM